> HP Memory > HP NetServer Computer Memory

Memory Upgrade for HP NetServer E800 D9405T

HP NetServer E800 D9405T memory upgrade specification, NetServer E800 D9405T maximum memory, memory speed, and memory upgrade options.

Upgrade memory on HP NetServer E800 D9405T upto a maximum of 2.0 GB
PC133 Registered ECC SDRAM DIMMs, with maximum 512MB per slot in 4 memory slots. The HP NetServer E800 D9405T takes the PC133 Registered ECC SDRAM DIMMs Memory Type.

HP NetServer E800 D9405T Memory Upgrade Specification
Standard Memory Maximum Memory Memory Expansion CPU Type Model/Chipset
64 MB (removable) 2.0 GB
PC133 Registered ECC SDRAM DIMMs
4 sockets 733MHz Intel Pentium III 133MHz FSB
 

HP NetServer E800 D9405T Memory Upgrade options.

What are memory sockets or slots and how are these divided into bank?

 

Memory Sockets or Slots are the place where memory RAM modules are inserted in the motherboard. The HP NetServer E800 D9405T has 4 memory expansion slots. A memory bank is a group of memory expansion sockets, a bank must be completely filled with memory modules of the same size and type in order for the system to recognize and address the memory. i.e. :

2 sockets (2 banks of 1) This indicates that there are 2 memory slots. These are divided into 2 banks, and each bank consists of one memory slot. So you can add memory one piece at a time for the system to use.

3 sockets (3 banks of 1) This indicates that there are 3 memory slots. These are divided into 3 banks, and each bank consists of one memory slot. So you can add memory one piece at a time for the system to use.

4 sockets (2 banks of 2) This indicates that there are 4 memory slots. These are divided into 2 banks, and each bank consists of two memory slots. So you must add memory two pieces at a time (they must be the same size and type of memory) in order for the system to benefit from the upgrade.

8 sockets (4 banks of 2) This indicates that there are 8 memory slots. These are divided into 4 banks, and each bank consists of two memory slots. So you must add memory two pieces at a time (they must be the same size and type of memory) in order for the system to benefit from the upgrade.

12 sockets (3 banks of 4) This indicates that there are 12 memory slots. These are divided into 3 banks, and each bank consists of four memory slots. So you must add memory four pieces at a time (and they must be the same size and type of memory) in order for the system to benefit from the upgrade.